D-Link DWS-1008 Cli Reference Manual page 249

DWS-1008 CLI Reference Guide
top_change_ack
config_pending
port_inconsistency
config BPDU's xmitted
config BPDU's received
tcn BPDU's xmitted
tcn BPDU's received
forward transition count
scp failure count
root inc trans count
inhibit loopguard
loop inc trans count
forward delay timer
forward delay timer value
message age timer
message age timer value
D-Link Systems, Inc.
Value of the topology change
acknowledgment flag in the next
configured bridge protocol data unit
(BPDU) to be transmitted on the
associated port. The flag is set in reply to
a topology change notification BPDU.
Indicates whether a configured BPDU is
to be transmitted on expiration of the hold
timer for the port.
Indicates whether the port is in an
inconsistent state.
Number of BPDUs transmitted from the
port. A number in parentheses indicates
the number of configured BPDUs
transmitted by the switch for this VLAN's
spanning tree.
Number of BPDUs received by this port.
A number in parentheses indicates the
number of configured BPDUs received by
the switch for this VLAN's spanning tree.
Number of topology change notification
(TCN) BDPUs transmitted on this port.
Number of TCN BPDUs received on this
port.
Number of times the port state
transitioned to the forwarding state.
Number of service control point (SCP)
failures.
Number of times the root bridge changed.
State of the loop guard. In the current
release, the state is always FALSE.
Number of loops that have occurred.
Status of the forwarding delay timer. This
timer monitors the time spent by a port in
the listening and learning states.
Current value of the forwarding delay
timer, in seconds.
Status of the message age timer. This
timer measures the age of the received
protocol information recorded for a port.
Current value of the message age timer,
in seconds.
STP Commands
248