D-Link DWS-1008 Cli Reference Manual page 380

DWS-1008 CLI Reference Guide
The table below describes the fields in this display.
Field
Filter
Dap
Radio
Rx Match
Tx Match
Dropped
Stop-After
D-Link Systems, Inc.
Description
Name of the snoop filter.
Distributed AP containing the radio to which
the filter is mapped.
Radio to which the filter is mapped.
Number of packets received by the radio
that match the filter.
Number of packets sent by the radio that
match the filter.
Number of packets that matched the filter
but that were not copied to the observer due
to memory or network problems.
Filter state:
• running - enabled
• stopped - disabled
• number-of-packets - If the filter is
running and the stop-after option was
used to stop the filter, this field displays
the number of packets that still need to
match before the filter is stopped.
Snoop Commands
379