Rf Detection Commands - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
MSS automatically performs RF detection scans on enabled and disabled radios to detect
rogue access points. A rogue access point is a BSSID (MAC address associated with an
SSID) that does not belong to a D-Link device .
MSS can issue countermeasures against rogue devices to prevent clients from being able to
use them. You can configure RF detection parameters on individual switches.
This chapter presents RF detection commands alphabetically. Use the following table to
locate the commands in this chapter based on their use.
clear rfdetect attack-list
Removes a MAC address from the attack list.
Syntax: clear rfdetect attack-list mac-addr
mac-addr
Defaults: None.
Access: Enabled.
Examples: The following command clears MAC address 11:22:33:44:55:66 from the
DWS-1008# clear rfdetect attack-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer in attacklist.
clear rfdetect black-list
Removes a MAC address from the client black list.
Syntax: clear rfdetect black-list mac-addr
mac-addr
Defaults: None.
Access: Enabled.
Examples: The following command removes MAC address 11:22:33:44:55:66 from the
DWS-1008# clear rfdetect black-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer blacklisted.
D-Link Systems, Inc.

RF Detection Commands

MAC address you want to remove from the attack
list.
attack list:
MAC address you want to remove from the black list.
black list:
RF Detection Commands
336