D-Link DWS-1008 Cli Reference Manual page 251

DWS-1008 CLI Reference Guide
topology change time
topology change detected
topology change count
topology change last recvd.
from
dynamic max age transition
port BPDU ok count
msg age expiry count
link loading
BPDU in processing
num of similar BPDU's to
process
received_inferior_bpdu
next state
src MAC count
total src MAC count
curr_src_mac
next_src_mac
D-Link Systems, Inc.
Time period, in seconds, during which
BPDUs are transmitted with the topology
change flag set by this switch when
it is the root bridge, after detection of
a topology change. It is equal to the
sum of the switch's maximum age and
forwarding delay parameters.
Indicates whether a topology change has
been detected by the switch.
Number of times the topology change
has occurred.
MAC address of the bridge from which
the switch last received a topology
change.
Number of times the maximum age
parameter was changed dynamically.
Number of valid port BPDUs received.
Number of expired messages.
Indicates whether the link is
oversubscribed.
Indicates whether BPDUs are currently
being processed.
Number of similar BPDUs received on a
port that need to be processed.
Indicates whether the port has received
an inferior BPDU or a response to a Root
Link Query (RLQ) BPDU.
Port state before it is set by STP.
Number of BPDUs with the same source
MAC address.
Number of BPDUs with all the source
MAC addresses.
Source MAC address of the current
received BPDU.
Other source MAC address from a
different source.
STP Commands
250