D-Link DWS-1008 Cli Reference Manual page 132
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
set accounting {dot1x | mac} (continued)
ssid ssid-name
wired
user-glob
mac-addr-glob
start-stop
stop-only
method1
method2
method3
method4
Defaults: Accounting is disabled for all users by default.
Access: Enabled
Usage: For network users with start-stop accounting whose records are sent to a RADIUS
server, MSS sends interim updates to the RADIUS server when the user roams.
Examples: The following command issues stop-only records to the RADIUS server group
DWS-1008# set accounting dot1x Nin stop-only sg2
success: change accepted.
D-Link Systems, Inc.
SSID name to which this accounting rule applies. To apply the rule to
all SSIDs, type any.
Applies this accounting rule specifically to users who are authenticated
on a wired authentication port.
Single user or set of users with administrative access or network
access. Specify a username, use the double-asterisk wildcard character
(**) to specify all usernames, or use the single-asterisk wildcard character
(*) to specify a set of usernames up to or following the first delimiter
character - either an at sign (@) or a period (.). Note: This option does
not apply if mac is specified. For mac, specify a mac-addr-glob.
A single user or set of users with access via a MAC address. Specify a
MAC address, or use the wildcard (*) character to specify a set of MAC
addresses. This option applies only when mac is specified.
Sends accounting records at the start and end of a network session.
Sends accounting records only at the end of a network session.
At least one of up to four methods that MSS uses to process accounting
records. Specify one or more of the following methods in priority order. If
the first method does not succeed, MSS tries the second method, and
so on. A method can be one of the following:
• local - Stores accounting records in the local database on the
switch. When the local accounting storage space is full, MSS
overwrites older records with new ones.
• server-group-name - Stores accounting records on one or
more Remote Authentication Dial-In User Service (RADIUS)
servers. You can also enter the names of existing RADIUS
server groups as methods.
sg2 for network user Nin, who is authenticated by 802.1X:
AAA Commands
131
Advertisement
Table of Contents
