D-Link DWS-1008 Cli Reference Manual page 178

DWS-1008 CLI Reference Guide
dapauto
radio 1
radio 2
mode enable
mode disable
Defaults:
Access:
Usage:
Examples:
DWS-1008# set ap 1-5 radio 1 mode enable
success: change accepted.
The following command enables radio 2 on ports 1 through 3:
DWS-1008# set ap 1-3 radio 2 mode enable
success: change accepted.
set {ap | dap} radio radio-profile
Assigns a radio profile to an DWL-8220AP radio and enables or disables the radio.
Syntax:
ap port-list
dap dap-num
dapauto
radio 1
radio 2
radio-profile
name
D-Link Systems, Inc.
Sets the radio mode for DWL-8220APs managed by the DWL-8220AP
configuration template.
Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP.
Enables a radio.
Disables a radio.
DWL-8220AP access point radios are disabled by default.
Enabled.
To enable or disable one or more radios to which a profile is assigned, use
the set ap radio radio-profile command. To enable or disable all radios that
use a specific radio profile, use the set radio-profile command.
The following command enables radio 1 on the DWL-8220AP access points
connected to ports 1 through 5:
set {ap port-list | dap {dap-num | auto}} radio {1 | 2} radio-profile name
mode {enable | disable}
List of ports.
Number of a Distributed AP.
Sets the radio profile for the DWL-8220AP configuration
template.
Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP.
Radio profile name of up to 16 alphanumeric characters, with
no spaces.
Access Point Commands
177