Clear Spantree Portvlancost; Clear Spantree Portvlanpri - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Examples:
DWS-1008# clear spantree portpri 9
success: change accepted.

clear spantree portvlancost

Resets to the default value the cost of a network port or ports on paths to the STP root bridge
for a specific VLAN on a switch, or for all VLANs.
Syntax:
port-list
all
vlan vlan-id VLAN name or number. MSS resets the cost for
Defaults: None.
Access: Enabled.
Usage: MSS does not change a port's cost for VLANs other than the one(s) you
specify.
Examples: The following command resets the STP cost for port 12 in VLAN sunflower:
DWS-1008# clear spantree portvlancost 12 vlan sunflower
success: change accepted.

clear spantree portvlanpri

Resets to the default value the priority of a network port or ports for selection as part of the
path to the STP root bridge, on one VLAN or all VLANs.
Syntax:
port-list
all
vlan vlan-id VLAN name or number. MSS resets the priority
D-Link Systems, Inc.
The following command resets the STP priority on port 9 to the default:
clear spantree portvlancost port-list
List of ports. The port cost is reset on the
specified ports.
Resets the cost for all VLANs.
only the specified VLAN.
clear spantree portvlanpri port-list
List of ports. The port priority is reset to 32 (the
default) on the specified ports.
Resets the priority for all VLANs.
for only the specified VLAN.
all vlan vlan-id
{ | }
all vlan vlan-id
{ | }
STP Commands
231