Session Management Commands - D-Link DWS-1008 Cli Reference Manual
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
Session Management Commands
Use session management commands to display and clear administrative and network user
sessions.
clear sessions
Clears all administrative sessions, or clears administrative console or Telnet sessions.
Syntax: clear sessions {admin | console | telnet [client [session-id]]}
admin
console
telnet
telnet client
[session-id]
Defaults: None.
Access: Enabled.
Examples: To clear all administrator sessions type the following command:
DWS-1008# clear sessions admin
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
To clear all administrative sessions through the console, type the following command:
DWS-1008# clear sessions console
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
To clear all administrative Telnet sessions, type the following command:
DWS-1008# clear sessions telnet
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
D-Link Systems, Inc.
Clears sessions for all users with administrative
access to the switch through a Telnet or SSH
connection or a console plugged into the switch.
Clears sessions for all users with administrative
access to the switch through a console plugged
into the switch.
Clears sessions for all users with administrative
access to the switch through a Telnet connection.
Clears all Telnet client sessions from the CLI to
remote devices, or clears an individual session
identified by session ID.
Session Management Commands
325
Advertisement
Table of Contents
