D-Link DWS-1008 Cli Reference Manual page 106

DWS-1008 CLI Reference Guide
show ntp (continued)
Field
NTP client
Current update-interval
Current time
Timezone
Summertime
Last NTP update
NTP Server
Peer state
Local state
D-Link Systems, Inc.
Description
State of the NTP client. The state can be one of the following:
• Enabled
• Disabled
Number of seconds between queries sent by the switch to the
NTP servers for updates.
System time that was current on the switch when you pressed
Enter after typing the show ntp command.
Time zone configured on the switch. MSS offsets the time reported
by the NTP server based on the time zone.
Note: This field is displayed only if you change the time zone.
Summertime period configured on the switch. MSS offsets the
system time +1 hour and returns it to standard time for daylight
savings time or a similar summertime period that you set.
Note: This field is displayed only if you enable summertime.
Time when the switch received the most recent update from an
NTP server.
IP address of the NTP server.
State of the NTP session from the point of view of the NTP
server:
• CORRECT
• REJECT
• SELCAND
• SYNCCAND
• SYSPEER
State of the NTP session from the point of view of the switch's
NTP client:
• INITED
• START
• SYNCED
IP Services Commands
105