D-Link DWS-1008 Cli Reference Manual page 151

DWS-1008 CLI Reference Guide
set mac-user attr (continued)
vlan-name
(network access
mode only)
Examples: The following command assigns input access control list (ACL) acl-03 to filter the
packets from a user at MAC address 01:02:03:04:05:06:
DWS-1008# set mac-user 01:02:03:04:05:06 attr filter-id acl-03.in
success: change accepted.
The following command restricts a user at MAC address 06:05:04:03:02:01 to network access
between 7 p.m. on Mondays and Wednesdays and 7 a.m. on Tuesdays and Thursdays:
DWS-1008# set mac-user 06:05:04:03:02:01 attr time-of-day
mo1900-1159,tu0000-0700,we1900-1159,th0000-0700
success: change accepted.
set mac-usergroup attr
Creates a user group in the local database on the switch for users who are authenticated by
a MAC address, and assigns authorization attributes for the group.
(To configure a user group and assign authorization attributes through RADIUS, see the
documentation for your RADIUS server.)
D-Link Systems, Inc.
Virtual LAN (VLAN)
assignment.
Note: On some RADIUS
servers, you might need
to use the standard
RADIUS attribute
Tunnel-Pvt-Group-ID,
instead of VLAN-Name.
AAA Commands
Name of a VLAN that you
want the user to use.
150