D-Link DWS-1008 Cli Reference Manual page 23

DWS-1008 CLI Reference Guide
The table below describes the fields of show system output.
Field
-------------------------------------------------------------------------------------------------------------------------
Product Name
System Name
System Countrycode
System Location
System Contact
System IP
System MAC
License
Boot Time
Uptime
Fan status
D-Link Systems, Inc.
Description
DWS model number.
System name (factory default, or optionally configured
with set system name).
Country-specific 802.11 code required for AP operation
(configured with set system countrycode).
Record of switch's physical location (optionally configured
with set system location).
Contact information about the system administrator or
another person to contact about the system (optionally
configured with set system contact).
Common interface, source, and default IP address for the
switch, in dotted decimal notation (configured with set
system ip-address).
DWS-1008's media access control (MAC) machine
address set at the factory, in 6-byte hexadecimal format.
Type of session license currently installed on the switch:
• 10-session (factory default) - The switch supports 10
concurrent users.
• 50-session - The switch supports 50 concurrent users.
• unlimited - The switch supports an unlimited number of
concurrent users.
Date and time of the last system reboot.
Number of days, hours, minutes, and seconds that the
switch has been operating since its last restart.
Operating status of the three switch cooling fans:
• OK - Fan is operating.
• Failed - Fan is not operating. MSS sends an alert to the
system log every 5 minutes until this condition is
corrected.
System Services Commands
22