Show Rfdetect Clients - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Total number of entries: 1
Blacklist MAC
------------------------ ---------------------
11:22:33:44:55:66 configured
11:23:34:45:56:67 assoc req flood

show rfdetect clients

Displays the wireless clients detected by a switch.
Syntax: show rfdetect clients [mac mac-addr]
mac mac-addr Displays detailed information for a specific client.
Defaults: None.
Access: Enabled.
Examples: The following command shows information about all wireless clients detected
DWS-1008# show rfdetect clients
Total number of entries: 30
Client MAC
--------------------------------------------------------------------------------------------------------------------
00:03:7f:bf:16:70
00:04:23:77:e6:e5 Intel
00:05:5d:79:ce:0f
00:05:5d:7e:96:a7 D-Link
00:05:5d:7e:96:ce D-Link
00:05:5d:84:d1:c5 D-Link
The following command displays more details about a specific client:
DWS-1008# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: D-Link
Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: D-Link, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most
recent 802.11 packet detected from the client.
D-Link Systems, Inc.
Type
by a switch's APs:
Client
Vendor
Unknown
D-Link
Port TTL
------ -----
- -
3 25
AP MAC AP Port/Radio
Vendor /Channel
Unknown dap 1/1/6
Unknown dap 1/1/2
Unknown dap 1/1/149
Unknown dap 1/1/149
Unknown dap 1/1/157
Unknown dap 1/1/1
RF Detection Commands
NoL Type Last
seen
1 intfr 207
1 intfr 155
1 intfr 87
1 intfr 117
1 intfr 162
1 intfr 52
342