DWS-1008 CLI Reference Guide
Use port commands to configure and manage individual ports and load-sharing port groups.
This chapter presents port commands alphabetically.
clear dap
Caution: When you clear a Distributed AP, MSS ends user sessions that are using the AP.
Removes a Distributed AP.
Syntax: clear dap dap-num
dap-num
Defaults: None
Access: Enabled
Examples: The following command clears Distributed AP 1:
DWS-1008# clear dap 1
This will clear specified DAP devices. Would you like to continue? (y/n) [n]y
clear port counters
Clears port statistics counters and resets them to 0.
Syntax: clear port counters
Defaults: None
Access: Enabled
Examples: The following command clears all port statistics counters and resets them to 0:
DWS-1008# clear port counters
success: cleared port counters
clear port-group
Removes a port group.
Syntax: clear port-group name name
D-Link Systems, Inc.
Port Commands
Number of the Distributed AP(s) you want to remove.
Port Commands
24