D-Link DWS-1008 Cli Reference Manual page 158

DWS-1008 CLI Reference Guide
user last-resort-any
Vlan-Name = foo
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
The table below describes the fields that can appear in show aaa output.
Field
Default Values
authport
acctport
timeout
acct-timeout
retrans
deadtime
key
author-pass
Radius Servers
Server
Addr
D-Link Systems, Inc.
Description
RADIUS default values for all parameters.
UDP port on the switch for transmission of RADIUS
authorization and authentication messages. The default port is
1812.
UDP port on the switch for transmission of RADIUS accounting
records. The default is port 1813.
Number of seconds the switch waits for a RADIUS server to
respond before retransmitting. The default is 5 seconds.
Number of seconds the switch waits for a RADIUS server to
respond to an accounting request before retransmitting.
The default is 5 seconds.
Number of times the switch retransmits a message before
determining a RADIUS server unresponsive. The default is 3
times.
Number of minutes the switch waits after determining a
RADIUS server is unresponsive before trying to reconnect with
this server. During the dead time, the RADIUS server is ignored
by the switch. The default is 0 minutes.
Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key.
Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username.
The default is admin.
Information about active RADIUS servers.
Name of each RADIUS server currently active.
IP address of each RADIUS server currently active.
AAA Commands
157