D-Link DWS-1008 Cli Reference Manual page 131

DWS-1008 CLI Reference Guide
set accounting {admin | console} (continued)
stop-only
method1
method2
method3
method4
Defaults: Accounting is disabled for all users by default.
Access: Enabled
Usage: For network users with start-stop accounting whose records are sent to a RADIUS
server, MSS sends interim updates to the RADIUS server when the user roams.
Examples: The following command issues start-and-stop accounting records at the local
DWS-1008# set accounting admin Natasha start-stop local
success: change accepted.
set accounting {dot1x | mac}
Sets up accounting services for specified wireless users with network access, and defines
the accounting records and where they are sent.
Syntax: set accounting {dot1x | mac} {ssid ssid-name | wired}
{user-glob | mac-addr-glob} {start-stop | stop-only}
method1 [method2] [method3] [method4]
dot1x
mac
D-Link Systems, Inc.
Sends accounting records only at the end of a network session.
At least one of up to four methods that MSS uses to process accounting
records. Specify one or more of the following methods in priority order. If the
first method does not succeed, MSS tries the second method, and so on. A
method can be one of the following:
• local - Stores accounting records in the local database on the switch. When
the local accounting storage space is full, MSS overwrites older records with
new ones.
• server-group-name - Stores accounting records on one or more Remote
Authentication Dial-In User Service (RADIUS) servers. You can also enter
the names of existing RADIUS server groups as methods.
database for administrator Natasha, when she accesses the switch using Telnet:
Users with network access through the switch who are authenticated by
802.1X.
Users with network access through the switch who are authenticated by MAC
authentication.
AAA Commands
130