D-Link DWS-1008 Cli Reference Manual page 344

DWS-1008 CLI Reference Guide
show rfdetect clients Output
Field
Client MAC
Client Vendor
AP MAC
AP Vendor
Port/Radio/Channel
NoL
Type
Last seen
show rfdetect clients mac Output
Field
RSSI
Rate
Last Seen
BSSID
Vendor
D-Link Systems, Inc.
Description
MAC address of the client.
Company that manufactures or sells the
client.
MAC address of the radio with which the
rogue client is associated.
Company that manufactures or sells the AP
with which the rogue client is associated.
Port number, radio number, and channel
number of the radio that detected the rogue.
For a Distributed AP, the connection number
is labeled dap. (This stands for distributed
ap.)
Number of listeners. This is the number of
AP radios that detected the rogue client.
Classification of the rogue device:
• rogue - Wireless device that is on the
network but is not supposed to be on the
network.
• intfr - Wireless device that is not part
of your network and is not a rogue, but
might be causing RF interference with AP
radios.
• known - Device that is a legitimate
member of the network.
Number of seconds since an AP radio last
detected 802.11 packets from the device.
Description
Received signal strength indication (RSSI)
- the strength of the RF signal detected
by the AP radio, in decibels referred to
1 milliwatt (dBm).
The data rate of the client.
Number of seconds since an AP radio last
detected 802.11 packets from the device.
MAC address of the SSID with which the
rogue client is associated.
Company that manufactures or sells the AP
with which the rogue client is associated.
RF Detection Commands
343