D-Link DWS-1008 Cli Reference Manual page 208

DWS-1008 CLI Reference Guide
auto-tune min-client-rate
auto-tune
max-retransmissions
show {ap | dap} counters
Displays DWL-8220AP access point and radio statistics counters.
Syntax:
Syntax:
port-list
dap-num
radio 1
radio 2
Defaults:
Access:
Usage:
Examples:
D-Link Systems, Inc.
Minimum data rate the radio must maintain for associated
clients. When RF Auto-Tuning is enabled, the radio can
temporarily increase its power to maintain the data rate with an
associated client.
Maximum percentage of packets that can be retransmitted by a
client before RF Auto-Tuning increases power.
Note: Only packets that are received twice by the DWL-8220AP
are counted as retransmissions. If a client retransmits a packet
but the DWL-8220AP receives only a single copy of the packet,
the packet is not counted as a retransmission.
show ap counters [port-list [radio {1 | 2}]]
show dap counters [dap-num [radio {1 | 2}]]
List of ports connected to the DWL-8220AP access point(s) for which to
display statistics counters.
Number of a Distributed AP for which to display statistics counters.
Shows statistics counters for radio 1.
Shows statistics counters for radio 2.
None
Enabled
To display statistics counters and other information for individual user
sessions, use the show sessions network command.
The following command shows statistics counters for a DWL-8220AP access
point on port 7:
Access Point Commands
207