necessary to prevent errors such as erratic mouse movement and incorrectly
displayed characters when accidentally touching the mouse or keyboard. Note
that pressing any key on the keyboard will interrupt the scan.
6.6.1. Start Auto-Scan Function
<Scroll Lock> → <Scroll Lock> → <S> → <Enter>. The auto-scan
banner will then appear, displaying the channel currently being scanned.
─┬── ┬
6.6.2. Stop Auto-Scan Function
To stop auto-scanning, press any key on the keyboard. Alternatively, you
may stop the auto-scan function by pressing any of the channel buttons on
the front panel of the KVM. The auto-scan will stop at the last scanned port.
6.6.3. Auto-Scan Mode
There are two auto-scan modes, please refer to section 7.3.1 Setup in OSD
– Scan Mode to set up the auto-scan mode.
Scan all computers.
Only scan computers which are marked for auto-scanning.
6.6.4. Auto-Scan Time Interval
The auto-scan time interval can be adjusted by pressing <F1> in the OSD
main menu. Please refer to section 7.3.1 Setup in OSD – Scan Time.
Figure 14: Auto-scan hotkey
│
│
│
└──────────
└───────────────
Figure 15: Auto-scan banner
──┬──────
└─
Channel Name
Channel Number
Indicates Scan Mode
18