Show Sessions - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Examples: To clear all sessions for MAC address 00:01:02:03:04:05, type the following
DWS-1008# clear sessions network mac-addr 00:01:02:03:04:05
To clear session 9, type the following command:
DWS-1008# clear sessions network session-id 9
SM Apr 11 19:53:38 DEBUG SM-STATE: localid 9, mac 00:06:25:09:39:5d,
flags 0000012fh, to change state to KILLING
Localid 9, globalid SESSION-9-893249336 moved from ACTIVE to KILLING
(client=00:06:25:09:39:5d)
To clear the session of user Natasha, type the following command:
DWS-1008# clear sessions network user Natasha
To clear the sessions of users whose name begins with the characters Jo, type the
following command:
DWS-1008# clear sessions network user
To clear the sessions of all users on VLAN red, type the following command:
DWS-1008# clear sessions network vlan red

show sessions

Displays session information and statistics for all users with administrative access to the
switch, or for administrative users with either console or Telnet access.
Syntax: show sessions {admin | console | telnet [client]}
admin
console
telnet
telnet client
Defaults: None.
Access: All, except for show sessions telnet client, which has enabled access.
D-Link Systems, Inc.
command:
Displays sessions for all users with administrative
access to the switch through a Telnet or SSH
connection or a console plugged into the switch.
Displays sessions for all users with administrative
access to the switch through a console plugged
into the switch.
Displays sessions for all users with administrative
access to the switch through a Telnet connection.
Displays Telnet sessions from the CLI to remote
devices.
Session Management Commands
Jo*
327