D-Link DWS-1008 Cli Reference Manual page 395

DWS-1008 CLI Reference Guide
f:
boot0:
boot1:
[filename]
Defaults: None.
Access: Boot prompt.
Usage: To display the image filenames, use the dir command. This command does not
list the boot code versions. To display the boot code versions, use the version
command.
Examples: The following command displays the system image version installed in boot
boot> fver boot1
File boot1:default version is 1.1.0.98.
help
Displays a list of all the boot prompt commands or detailed information for an individual
command.
Syntax: help [command-name]
command-
name
Defaults: None.
Access: Boot prompt.
Usage: If you specify a command name, detailed information is displayed for that command.
If you do not specify a command name, all the boot prompt commands are listed.
Examples: The following command displays detailed information for the fver command:
boot> help fver
fver Display the version of the specified device:filename.
USAGE: fver [c:file|d:file|e:file|f:file|boot0:file|boot1:file|boot2:file|boo
t3:file]
Command to display the version of the compressed image file
associated with the given device:filename.
D-Link Systems, Inc.
Secondary partition of the flash card in the flash card
slot.
Boot partition 0.
Boot partition 1.
System image filename.
partition 1:
Boot prompt command.
Boot Prompt Commands
394