Show Igmp Mrouter - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
TTL
IGMP vlan member
ports
IGMP static ports
IGMP statistics

show igmp mrouter

Displays the multicast routers in a switch's subnet, on one VLAN or all VLANs. Routers are
listed separately for each VLAN, according to the port number through which the switch can
reach the router.
Syntax:
vlan vlan-id VLAN name or number. If you do not specify a
Defaults:
Access:
Examples:
DWS-1008# show igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr Mrouter-MAC
---- --------------- ----------------- ----- -----
10 192.28.7.5 00:01:02:03:04:05 dvmrp
D-Link Systems, Inc.
Number of seconds before this entry ages
out if the switch does not receive a query
message from the querier.
Physical ports in the VLAN. This list
includes all network ports configured to be
in the VLAN and all ports MSS dynamically
assigns to the VLAN when a user assigned
to the VLAN becomes a receiver. For
example, the list can include an DWL-8200AP
access port that is not configured to be in
the VLAN when a user associated with the
DWL-8200AP access point on that port
becomes a receiver for a group. When all
receivers on a dynamically added port age
out, MSS removes the port from the list.
Static receiver ports.
Multicast message and packet statistics.
These are the same statistics displayed by
the show igmp statistics command.
show igmp mrouter
VLAN, MSS displays the multicast routers in all
VLANs.
None.
All.
The following command displays the multicast routers in VLAN orange:
vlan vlan-id]
[
Type TTL
33
IGMP Snooping Commands
263