D-Link DWS-1008 Cli Reference Manual page 398

DWS-1008 CLI Reference Guide
show
Displays the currently active boot profile. A boot profile is a set of parameters that a switch
uses to control the boot process. Each boot profile contains the following parameters:
• Boot type - Either compact flash (local device on the switch) or network (TFTP)
• Boot device - Location of the system image file
• Filename - System image file
• Flags - Number representing the bit settings of boot flags to pass to the booted
• Options - String up to 128 bytes of boot options to pass to the booted system image
A switch can have up to four boot profiles, numbered 0 through 3. Only one boot profile can
be active at a time. You can create, change, and delete boot profiles. You also can activate
another boot profile in place of the currently active one.
Syntax: show
Defaults: None.
Access: Boot prompt.
Examples: To display the currently active boot profile, type the following command at the
boot> show
BOOT Index: 0
BOOT TYPE:
DEVICE:
FILENAME:
FLAGS:
OPTIONS:
The table on the next page describes the fields in the display.
D-Link Systems, Inc.
system image.
boot prompt:
c
boot1:
default
00000000
run=nos;boot=0
Boot Prompt Commands
397