Set System Mode - D-Link xStack DWS-3200 Series Cli Manual

set system mode

The set system mode Priviledged EXEC mode command activates/deactivates features.
Syntax
set system mode {router | switch} qos {active | inactive} policy-based-vlans {active | inactive}
Parameters
•
mode router — The device works as switch-router.
•
mode switch — The device works as switch.
•
qos active — Activate QoS features.
•
qos inactive — Deactivate QoS features.
•
policy-based-vlans active — Activate Policy based VLANs.
•
policy-based-vlans inactive — Deactivate Policy based VLANs.
Default Configuration
Product specific
Command Mode
Priviledged EXEC mode
User Guidelines
After executing the command, the startup-config would be deleted and the device would be rebooted. It is highly
recommended to backup the startup-config before executing this command.
Example
The following example configures the device to work as switch-router, with QoS and Policy based VLANs.
Console> set system mode router qos active policy-based-vlans active
System Management Commands
Page 390
set system mode