D-Link DWS-1008 Cli Reference Manual page 223

DWS-1008 CLI Reference Guide
AP with serial ID 223344:
DWS-1008# show dap connection serial-id 223344
Total number of entries: 1
DAP Serial Id
9 223344
The table describes the fields in this display.
Field
-----------------------------------------------------------------------------------------------------------------------
DAP
-----------------------------------------------------------------------------------------------------------------------
Serial Id
-----------------------------------------------------------------------------------------------------------------------
DAP IP Address
-----------------------------------------------------------------------------------------------------------------------
Switch IP Address
show dap global
Displays configuration information for Distributed APs configured on the DWS-1008
switch.
Syntax:
dap-num
serial-id
serial-ID
Defaults:
Access:
Usage:
Examples:
D-Link Systems, Inc.
DAP IP Address
10.10.4.88
Description
Connection ID you assigned to the Distributed AP. If the connection
is configured on another switch, this field contains a hyphen ( -).
Serial ID of the Distributed AP.
IP address assigned by DHCP to the Distributed AP.
System IP address of the switch on which the DWL-8220AP has an
active connection. This is the switch that the DWL-8220AP used for
booting and configuration and is using for data transfer.
show dap global [dap-num | serial-id serial-ID]
Number of a Distributed AP for which to display configuration settings.
DWL-8220AP access point serial ID.
None.
Enabled.
To show information only for Distributed APs that have active
connections, use the show dap connection command.
The following command displays configuration information for all Distributed
APs configured on the DWS-1008 switch:
Switch IP Address
10.9.9.11
Access Point Commands
222