D-Link DWS-1008 Cli Reference Manual page 190

DWS-1008 CLI Reference Guide
Access:
Usage:
Examples:
DWS-1008# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
set radio-profile max-tx-lifetime
Changes the maximum transmit threshold for the DWL-8220AP radios in a radio profile. The
maximum transmit threshold specifies the number of milliseconds that a frame scheduled to
be transmitted by a radio can remain in buffer memory.
Syntax:
name
time
Defaults:
Access:
Usage:
Examples:
DWS-1008# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
set radio-profile mode
Creates a new radio profile, or disables or reenables all DWL-8220AP radios that are using
a specific profile.
Syntax:
radio-profile
D-Link Systems, Inc.
Enabled
You must disable all radios that are using a radio profile before you can
change parameters in the profile. Use the set radio-profile mode command.
The following command changes the maximum receive threshold for radio
profile rp1 to 4000 ms:
set radio-profile name max-tx-lifetime time
Radio profile name.
Number of milliseconds. You can enter a value from 500 (0.5 second) through
250,000 (250 seconds).
The default maximum transmit threshold for DWL-8220AP radios is 2000ms.
Enabled
You must disable all radios that are using a radio profile before you can
change parameters in the profile. Use the set radio-profile mode command.
The following command changes the maximum transmit threshold for radio
profile rp1 to 4000 ms:
set radio-profile name [mode {enable | disable}]
Radio profile name of up to 16 alphanumeric characters, name with no
spaces. Use this command without the mode enable or mode disable
option to create a new profile.
Access Point Commands
189