Mounting Kit To Increase The Degree Of Protection To Ip20 - Siemens SINAMICS DCM Operating Instructions Manual

Type spectrum, ordering information
2.5 Accessories
CAUTION
The parallel interface (X165, X166) at the SINAMICS DCM is not compatible to the parallel
interface (X165) at the SIMOREG CCP. It is not permissible that both connectors are
connected.
For more detailed information as well as support when selecting a suitable SIMOREG CCP
for your application, please contact your local Siemens office.
2.5.2

Mounting kit to increase the degree of protection to IP20

Degree of protection IP20 acc. to EN 60529
The degree of protection indicates protection against touching and penetration of solid
objects and/or water.
Units in the SINAMICS DCM range are delivered with degree of protection IP00 and
therefore offer no protection against touching or penetration. The mounting kit for units with a
rated DC current up to 850 A increases the degree of protection to IP20.
Degree of protection IP20 offer protection against touching with the finger and penetration of
solid objects greater than 12.5 mm dia, but no protection against water.
For ordering data, see also the section titled "Ordering information for options and
accessories".
The installation instructions are provided on the SINAMICS DCM Documentation DVD (as of
12/2010 edition) under "Accessories"
30
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter