Pin Code Provisioning Settings Configuration - Yealink SIP-T3 Administrator's Manual

Description It configures the code name to trigger auto provisioning.
Permitted
String within 64 characters
Values
Default Blank
Parameter static.autoprovision.X.code
It configures the activation code to trigger auto provisioning.
Example:
Description
static.autoprovision.1.code = 123
static.autoprovision.2.code = **
static.autoprovision.3.code = *123
Permitted
Numbers, #/*, or a combination of numbers and */#
Values
Default Blank
Parameter static.autoprovision.X.url
It configures the access URL of the provisioning server for the phone to perform auto provisioning
Description
which is triggered by an activation code.
Permitted
URL within 511 characters
Values
Default Blank
Parameter static.autoprovision.X.user
It configures the user name for authentication during auto provisioning which is triggered by an activ-
Description
ation code.
Permitted
String within 64 characters
Values
Default Blank
Parameter static.autoprovision.X.password
It configures the password for authentication during auto provisioning which is triggered by an activ-
Description
ation code.
Permitted
String within 32 characters
Values
Default Blank
[1]
X is an activation code ID. X=1-50.
[2]
If you change this parameter, the phone will reboot to make the change take effect.

PIN Code Provisioning Settings Configuration

You can enable the users to trigger phones to perform provisioning by dialing a PIN code.
For more information on PIN code provisioning, refer to
The following table lists the parameters you can use to configure settings for PIN code provisioning.
Parameter phone_setting.retain_pin.enable
Description It enables or disables the phone to save the entered PIN code.
[1][2]
[1][2]
[1][2]
[1][2]
Yealink SIP IP Phones Auto Provisioning
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Provisioning
Guide.
95