Yealink SIP-T3 Administrator's Manual page 377

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 0
Web UI Directory > LDAP > LDAP Sorting Results
Parameter ldap.incoming_call_special_search.enable
It enables or disables the phone to search the telephone numbers starting with "+" symbol and "00"
from the LDAP server if the incoming phone number starts with"+" or "00". When completing the LDAP
search, all the search results will be displayed on the phone screen.
Example:
If the phone receives an incoming call from the phone number 0044123456789, it will search
Description
0044123456789 from the LDAP server first, if no result found, it will search +44123456789 from the
server again. The phone will display all the search results.
Note: It works only if "ldap.call_in_lookup" is set to 1 (Enabled). You may need to set "ldap.name_fil-
ter" to be (|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for searching the telephone numbers
starting with "+" symbol.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter ldap.numb_display_mode
It configures the display mode of the attribute name for the LDAP contact number.
Description
Note: It works only if "ldap.enable" is set to 1 (Enabled).
0-NumberN (N is an increasing number), for example
Permitted
Values
1-Attribute name pushed by the server
Default
0
Parameter ldap.customize_label
It configures the display name of the LDAP phone book.
If it is left blank, LDAP is displayed.
Description
Note: It works only if "ldap.enable" is set to 1 (Enabled).
Permitted
String within 512 characters
Values
Default
Blank
Web UI Directory > LDAP > LDAP Label
Parameter ldap.extra_attr
It configures the extra attributes of each record to be returned by the LDAP server.
Multiple attributes are separated by spaces.
Example:
Description
ldap.extra_attr = title lang
This requires the "title" and "lang" extra attributes set for each contact record on the LDAP server.
Note: It works only if "ldap.enable" is set to 1 (Enabled).
Permitted
String
Values
371
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Number1, Number2, Number3...
<y0000000000xx>.cfg
<y0000000000xx>.cfg