Auto Provisioning Settings Configuration - Yealink W60P Administrator's Manual

Auto Provisioning Settings Configuration

The following table lists the parameters you can use to configure settings for auto provisioning.
Parameter static.auto_provision.attempt_expired_time
It configures the timeout interval (in seconds) to transfer a file via auto provisioning.
Description
Note: It has a higher priority than the value defined by the parameter "static.network.attempt_expired_
time".
Permitted
Integer from 1 to 300
Values
Default 5
Web UI Settings->Auto Provision->Attempt Expired Time(s)
Parameter static.network.attempt_expired_time
It configures the timeout interval (in seconds) to transfer a file for HTTP/HTTPS connection.
Description
Note: It has a lower priority than the value defined by the parameter "static.auto_provision.attempt_
expired_time".
Permitted
Integer from 1 to 20
Values
Default 10
Parameter static.auto_provision.attempt_before_failed
It configures the maximum number of attempts to transfer a file before the transfer fails.
Description Example:
static.auto_provision.attempt_before_failed = 5
Permitted
Integer from 1 to 10
Values
Default 3
static.auto_provision.retry_delay_after_file_transfer_
Parameter
failed
It configures the time (in seconds) to wait after a file transfer fails before retrying the transfer via auto pro-
visioning.
Description
Example:
static.auto_provision.retry_delay_after_file_transfer_failed = 5
Permitted
Integer from 0 to 300
Values
Default 5
Parameter static.auto_provision.reboot_force.enable
It enables or disables the IP phone to reboot after auto provisioning, even if there is no specific con-
figuration requiring a reboot. It is especially useful when there is no specific configuration requiring
reboot in the configuration files, but you want the IP phone to reboot after auto provisioning.
Description
Note: It works only for the current auto provisioning process. If you want the IP phone to reboot after
every auto provisioning process, the parameter must be always contained in the configuration file and set
to 1.
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Phone Provisioning
51