Yealink SIP-T3 Administrator's Manual page 607

Default 0
Supported
All phones except T48G, T46G, T42G, T41P, T40P, T40G, T33P, T33G, T31P, T31G, T31, T30P, T30,
Devices T29G, T23P, T23G, T21(P) E2 and T19(P) E2
Web UI Settings > Configuration > Local Log > USB Auto Exporting Syslog
Parameter static.local_log.level
It configures the lowest level of local log information to be rendered to the <MAC>.log file.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
Description
events of a lower severity level. The logging level you choose determines the lowest severity of events
to log.
0-the system is unusable
1-action must be taken immediately
2-critical condition
Permitted
3-error conditions
Values
4-warning conditions
5-normal but significant condition
6-informational
Default 3
Web UI Settings > Configuration > Local Log > Local Log Level
Parameter static.local_log.max_file_size
It configures the maximum size (in KB) of the log files can be stored on the IP phone.
When this size is about to be exceeded,
(1) If the local log files are configured to be uploaded to the server by the parameter "static.auto_pro-
vision.local_log.backup.enable", the phone will clear all the local log files on the phone once suc-
cessfully backing up.
Description
(2) If "static.auto_provision.local_log.backup.enable" is set to 0 (Disabled), the phone will erase half of
the logs from the oldest log information on the phone.
Example:
static.local_log.max_file_size = 1024
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Integer from 256 to 1024
Permitted
Values
Other phones:
Integer from 256 to 2048
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
256
Default
Other phones:
1024
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Web UI Settings > Configuration > Local Log > Max Log File Size (256-1024KB)
Other phones:
Troubleshooting Methods
<y0000000000xx>.cfg
<y0000000000xx>.cfg
601