Yealink SIP-T3 Administrator's Manual page 296

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Menu > Features > Dsskey > Line Key X > Type
CP925/CP935W:
Phone UI
Dsskey > Line Key X > Type
Para-
linekey.X.line
meter
Descrip-
It configures the desired line to apply the line key feature.
tion
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0, 1-16;
T53W/T53/T53C/T43U/T42U/T42S/T42G: 0, 1-12;
T41P/T41S/T27G: 0, 1-6;
T33P/T33G: 0, 1-4;
T40P/T40G/T23P/T23G: 0, 1-3
Permitted
Values
T31P/T31G/T31/T21(P) E2: 0, 1-2
CP925/CP935W: 1
Note: features.fwd_mode = 1 & linekey.X.type =2 & linekey.X.line =0: it means forward will apply to all
lines on the phone; linekey.X.type = 13 & linekey.X.line =0: it means the phone can automatically
switch accounts for speed dial; linekey.X.type = 14 & linekey.X.line =0: it means the phone can auto-
matically switch accounts for intercom.
Default 1
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Dsskey > Line Key > Line KeyX > Line
Menu > Features > Dsskey > Line Key X > Account ID
CP925/CP935W:
Phone UI
Dsskey > Line Key X > Account ID
Para-
linekey.X.value
meter
It configures the value for some line key features.
Descrip-
For example, when you assign the Speed Dial to the line key, this parameter is used to specify the con-
tion
tact number you want to dial out. It is also used to specify the contact number with the DTMF sequence.
The contact number and DTMF sequence are separated by commas.
Permitted
String within 99 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Dsskey > Line Key > Line KeyX > Value
Menu > Features > Dsskey > Line Key X > Value
CP925/CP935W:
Phone UI
Dsskey > Line Key X > Value
Para-
linekey.X.label
meter
Descrip-
It configures the label displayed on the phone screen.
290
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg