Yealink SIP-T3 Administrator's Manual page 363

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Elements Attributes
display_name
group
ring
display_name
office_number
mobile_number
other_number
Contact
line
ring
357
Specify the group name.
For example All Contacts, Blocklist or Friend
Specify a ringtone for the group.
System ring tone:
Auto
Silent.wav
Splash.wav
RingN.wav (integer N ranges from 1 to 8)
Custom ring tone:
Name.wav (the custom ring tone should be uploaded in advance)
Specify the contact name.
For example Jim
Some characters (for example, ") are key syntax markers and may never
appear in the content. Non-standard name formats may cause XML pars-
ing to fail. You can use the escape sequence instead.
Error: display_name="Hurrell "&" Mclean"
Correct 1: display_name="Hurrell & Mclean"
Correct 2: display_name="Hurrell & Mclean"
Note: The contact name cannot be blank.
Specify the office number or macro EDK Macro Strings
Specify the mobile number or macro EDK Macro Strings.
Specify the other number or macro EDK Macro Strings
Specify a registered line for this contact for calling.
Valid Values: -1~15;
-1 stands for Auto (the first registered line);
0~15 stand for line1~line16.
vary by phone models:
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0~15;
T53W/T53/T53C/T43U/T42U/T42S/T42G: 0~11; T41P/T41S/T27G: 0~5;
T33P/T33G: 0~3; T40P/T40G/T23P/T23G: 0~2; T31P/T31G/T31/T21(P) E2:
0~1
Note: This is not applicable to T30P/T30/T19(P) E2/CP920/CP925/CP935W
phones.
Specify a ringtone for this contact.
System ring tone:
Auto
Silent.wav
Splash.wav
Description