Yealink SIP-T3 Administrator's Manual page 98

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
been inactivated for 60 minutes (1 hour) between the starting time and ending time.
Note: The phone may perform auto provisioning when you are using the phone during office hour. It
works only if "static.auto_provision.weekly.enable" is set to 1 (On).
Permitted
Integer from 0 to 120
Values
Default 0
Web UI Settings > Auto Provision > Inactivity Time Expire(0~120min)
Parameter static.auto_provision.weekly.dayofweek
It configures the days of the week for the phone to perform auto provisioning weekly.
Example:
static.auto_provision.weekly.dayofweek = 01
If "static.auto_provision.weekly_upgrade_interval" is set to 0, it means the phone performs auto pro-
Description
visioning every Sunday and Monday.
If "static.auto_provision.weekly_upgrade_interval" is set to other value (for example, 3), it means the
phone performs auto provisioning by randomly selecting a day from Sunday and Monday every three
weeks.
Note: It works only if "static.auto_provision.weekly.enable" is set to 1 (On).
0,1,2,3,4,5,6 or a combination of these digits
0-Sunday
1-Monday
2-Tuesday
Permitted
Values
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Default 0123456
Web UI Settings > Auto Provision > Day of Week
static.auto_provision.weekly.begin_time
Parameter
static.auto_provision.weekly.end_time
It configures the starting/ending time of the day for the phone to perform auto provisioning weekly.
Description
Note: It works only if "static.auto_provision.weekly.enable" is set to 1 (On).
Permitted
Time from 00:00 to 23:59
Values
Default 00:00
Web UI Settings > Auto Provision > Time
Parameter static.auto_provision.flexible.enable
It triggers the flexible feature to on or off.
Description
Note: The day within the period is based upon the phone's MAC address and does not change with a
reboot, whereas the time within the start and end is calculated again with every reboot.
92
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg