Capturing The Packets In Normal Way; Ethernet Software Capturing Configuration - Yealink SIP-T3 Administrator's Manual

Note: The steps may differ for different web browsers.

Capturing the Packets in Normal Way

Procedure
1. From the web user interface, go to Settings > Configuration.
2. Select Normal from the Pcap Type drop-down menu.
3. Click Start in the Pcap Feature field to start capturing signal traffic.
4. Reproduce the issue to get stack traces.
5. Click Stop in the Pcap Feature field to stop capturing.
6. Click Export to open the file download window, and then save the file to your local system.

Ethernet Software Capturing Configuration

You can choose to capture the packets using the Ethernet software in two ways:
Receiving data packets from the hub: Connect the Internet port of the IP phone and the PC to the same hub, and
l
then use Sniffer, Ethereal or Wireshark software to capture the signal traffic.
Receiving data packets from PC port: Connect the Internet port of the IP phone to the Internet and the PC port of
l
the IP phone to a PC. Before capturing the signal traffic, make sure the phone can span data packets received
from the Internet port to the PC port. It is not applicable to CP920/CP925/CP935W phones.
Topic
Span to PC Port Configuration
Troubleshooting Methods
611