Call Forward In Custom Mode Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
CP925/CP935W:
More > Features > Call Forward > No Answer Forward > On Code
Parameter forward.no_answer.off_code
It configures the no answer forward off code to deactivate the server-side no answer forward feature.
The phone will send the no answer forward off code to the server when you deactivate the no answer
Description forward feature on a phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
Web UI
Features > Forward&DND > Forward > No Answer Forward > Off Code
Menu > Features > Call Forward > No Answer Forward > Off Code
Phone UI
CP925/CP935W:
More > Features > Call Forward > No Answer Forward > Off Code

Call Forward in Custom Mode Configuration

The following table lists the parameters you can use to configure call forward in custom mode.
Parameter account.X.always_fwd.enable
It triggers always forward feature to on or off.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
0-Off
Permitted
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
Values
meter "account.X.always_fwd.target") immediately.
Default 0
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI Features > Forward&DND > Forward > AccountX > Always Forward > On/Off
Phone UI Menu > Features > Call Forward > AccountX > Always Forward > Always Forward
Parameter account.X.always_fwd.target
It configures the destination number of the always forward.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI
Features > Forward&DND > Forward > AccountX > Always Forward > Target
450
<y0000000000xx>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg