Edk Configuration - Yealink SIP-T3 Administrator's Manual

Macro Action
$LED<color and time>&L<label>$
(not applicable to T30P/T30/T19(P)
E2/CP920 phones)
$XML<xml browser url>$

EDK Configuration

To configure the EDK list, EDK user input prompt, EDK soft keys, and custom DSS keys, you have to enable EDK
feature. By default, the EDK feature is disabled.
Yealink phones can display the softkey ID or menu item ID by long pressing the Volume Up key. It is especially use-
ful for those users who need to view the softkey ID or menu item ID when configuring EDK macros.
The following graphic shows an example for displaying the softkey ID and menu item ID after accessing the menu
of T46S/G phones:
This label is used if no label is configured for a custom DSS key or soft key,
otherwise, this one is ignored. Make this the first entry in the action string.
Example: $LEDK2$1234$Tinvite$ defines calling out the number 1234 and
using the label "EDK2" for a Custom Key.
The status of the BLF/BLF list DSS key LED. Specify the LED color for the
BLF/BLF list DSS key and the duration time (in milliseconds) for the cor-
responding status of the BLF/BLF list DSS key. The valid value of the duration
ranges from 100 to 60000ms.
Can be composed of multiple combinations of "color" and "time". The status
will be stuck in an infinite loop until triggered by other macros.
Supported colors include (must be lowercase):
r (red)
l
ri (red; red with an incoming mark for T57W/T48U/T48S/T48G)
l
ro (red; red with an outgoing mark for T57W/T48U/T48S/T48G)
l
rd (red; red with a DND mark for T57W/T48U/T48S)
l
g (green)
l
gi (green; green with an incoming mark for T57W/T48U/T48S/T48G)
l
go (green; green with an outgoing mark for T57W/T48U/T48S/T48G)
l
y (yellow)
l
yi (yellow; yellow with an incoming mark for T57W/T48U/T48S/T48G)
l
yo (yellow; yellow with outgoing mark for T57W/T48U/T48S/T48G)
l
yd (yellow; yellow with a DND mark for T57W/T48U/T48S)
l
o (off)
l
&L<label> (Optional.): You have to put the "&L<label>" last in the command
flow.
Example: $LEDg1000o100r300&Lidle$ means an infinite loop for BLF/BLF
list DSS key LED status: glow green for 1000ms, be in the off state for 100ms
and then glow red for 300ms. At the same time, the label of the BLF/BLF list
DSS key is changed to "idle".
Note: The last "color" can be configured without "time", and it means per-
manently displaying the last color until triggered by other macros. This macro
can be only used for BLF/BLF list feature. For more information, refer to
BLF/BLF List Key LED Status and Behavior
The action is to execute the XML browser URL.
Example: $XMLhttp://10.83.3.12/XML/PhoneExecute.xml$ defines excute the
XML browser URL http://10.83.3.12/XML/PhoneExecute.xml . For more inform-
ation on XML browser, refer to
Phone Customization
Description
Configuration.
XML Browser.
309