Yealink SIP-T3 Administrator's Manual page 33

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv4
> Static IPv4 Client > Subnet Mask
Parameter static.network.internet_port.gateway
It configures the IPv4 default gateway for the wired network.
Description
Note: It works only if "static.network.internet_port.type" is set to 2 (Static IP).
Permitted Values IPv4 Address
Default
Blank
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925:
Network > Basic > IPv4 Config > Configuration Type (Static IP) > Default Gateway
Web UI
Other Phones:
Network > Basic > IPv4 Config > Static IP Address > Default Gateway
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv4 > Static IP >
Default Gateway
CP925:
Phone UI
More > Advanced (default password: admin) > Network > WAN Port > IPv4 > Static IP > Default
Gateway
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv4
> Static IPv4 Client > Default Gateway
Parameter static.network.static_dns_enable
It triggers the static DNS feature to on or off for the wired network.
Description
Note: It works only if "static.network.internet_port.type" is set to 0 (DHCP).
0-Off, the phone will use the IPv4 DNS obtained from DHCP.
Permitted Values
1-On, the phone will use manually configured static IPv4 DNS.
Default 0
Web UI Network > Basic > IPv4 Config > Static DNS
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv4 > Type(DHCP) >
Static DNS
CP925:
Phone UI
More > Advanced (default password: admin) > Network > WAN Port > IPv4 > Type(DHCP) >
Static DNS
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv4
> DHCP IPv4 Client > Static DNS
Parameter static.network.primary_dns
It configures the primary IPv4 DNS server for the wired network.
Description
Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 & IPv6). In
the DHCP environment, you need to make sure "static.network.static_dns_enable" is set to 1
27
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg