Favorites Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
In the Favorites directory:
On the idle screen:
Topic

Favorites Configuration

Favorites Configuration
The following table lists the parameters you can use to configure the favorites.
Parameter local_contact.favorite.enable
Description It enables or disables the Favorites feature.
0-Disabled
Permitted
Values
1-Enabled, the phone automatically assigns Speed Dial keys for favorite contacts.
Default 0 (1 for CP920)
Parameter local.dsskey_type_config.mode
It configures which screen to enter by long pressing the line key or ext key.
Description
Note: It works only if "local_contact.favorite.enable" is set to 1 (Enabled).
0-Enter the line key/ext key configuration screen
Permitted
Values
1-Enter the Add Contact screen
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter phone_setting.favorite_sequence_type
Description It configures the order of Speed Dial (Favorite) keys to be assigned automatically.
363
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg