Multicast Paging - Yealink SIP-T3 Administrator's Manual

Hide thumbs Also See for SIP-T3:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default
0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S,
Devices
T29G, T27G, CP920, CP925, CP935W
Parameter features.auto_recording.enable
It enables or disables the USB automatic recording feature.
Description
Note: It works only if "features.usb_call_recording.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default
0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S,
Devices
T29G, T27G, CP920, CP925, CP935W
Parameter features.idle_recording.enable
It enables or disables the USB idle recording feature.
Description
Note: It works only if "features.usb_call_recording.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default
0
Supported
CP920
Devices
Parameter phone_setting.recorder_tone.enable
Description It enables or disables the phone to play an alert tone when the recording starts.
0-Disabled
Permitted
Values
1-Enabled
Default
0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Devices

Multicast Paging

Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listen-
ing to a specific multicast group on a specific channel.
Yealink phones support the following 31 channels:
0: Broadcasts are sent to channel 0. Note that the Yealink phones running firmware version 80 or earlier can be
l
regarded as listening to channel 0. It is the default channel.
1 to 25: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broad-
l
casting with Polycom phones which have 25 channels you can listen to.
26 to 30: Broadcasts are sent to channel 26 to 30.
l
The phones can only send and receives broadcasts to/from the listened channels. Other channels' broadcasts will
be ignored automatically by the IP phone.
Topics
Multicast Paging Group Configuration
462
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t2Sip-t4Sip-t5Sip-cp920

Table of Contents