Variable Values List - Yealink SIP-T3 Administrator's Manual

Event
UnHold When the IP phone resumes a held call.
Held When a call of the IP phone is held.
UnHeld When a held call is resumed.
Mute When the IP phone mutes a call.
UnMute When the IP phone un-mutes a call.
Missed Call When the IP phone misses a call.
IP Changed When the IP address of the IP phone changes.
Idle To Busy When the state of the IP phone changes from idle to busy.
Busy To Idle When the state of phone changes from busy to idle.
Reject Incoming Call When the IP phone rejects an incoming call.
Answer New Incoming
When the IP phone answers a new call.
Call
Transfer Failed When the IP phone fails to transfer a call.
Transfer Finished When the IP phone completes transferring a call.
Forward Incoming Call When the IP phone forwards an incoming call.
Autop Finish When the IP phone completes auto provisioning via power on.
Call Waiting On When the IP phone enables the call waiting.
Call Waiting Off When the IP phone disables the call waiting.
When the IP phone presses the HEADSET key (not applicable to CP920/CP925
Headset
/CP935W phones).
When the IP phone presses the Speakerphone key (not applicable to CP920/CP925
Handfree
/CP935W phones).
Cancel Call Out When the phone cancels an outgoing call in the ring-back state.
Remote Busy When an outgoing call is rejected.
Call Remote Canceled When the remote party cancels the outgoing call in the ringing state.
Peripheral Information When the accessory is unplugged or plugged.
VPN IP When the phone IP address assigned by the VPN server changes.

Variable Values List

The following table lists predefined variable values.
Variable Value
$mac The MAC address of the IP phone.
$ip The IP address of the IP phone.
Description
Description
Advanced Features
514