Blf Key Led/Icon And Behavior For Hold State Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
parked against the monitored phone.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.parked.talking.action = newcall
Note: It works only if "blf.enhanced.parked.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.parked.idle.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is idle and a call is
parked against the monitored phone.
This value uses the same macro action string syntax as an Enhanced DSS key.
Description
Example:
blf.enhanced.parked.idle.action = newcall
Note: It works only if "blf.enhanced.parked.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices

BLF Key LED/Icon and Behavior for Hold State Configuration

The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for hold state (the
call on the monitored phone is placed on hold).
Parameter blf.enhanced.hold.enable
It enables or disables the custom configuration when the call on the monitored phone is placed on
Description
hold.
0-Disabled
Permitted
Values
1-Enabled, the phone will display the custom BLF/BLF List DSS key LED status/icon colors.
Default 0
Supported
All phones except T48G, T46G, T42G, T41P, T30P, T30, T29G, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.hold.led
It configures the custom BLF/BLF List DSS key LED status/icon colors when the call on the monitored
phone is placed on hold.
This value uses the same macro action string syntax as an Enhanced DSS key.
Description Example:
blf.enhanced.hold.led = $LEDg1000o$
For T57W/T48U/T48S phones, the BLF/BLF List DSS key field displays a green icon for 1000ms and
then turns to white.
499
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg