Anonymous Call Rejection Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Topic

Anonymous Call Rejection Configuration

Anonymous Call Rejection Configuration
The following table lists the parameters you can use to configure anonymous call rejection.
Parameter account.X.reject_anonymous_call
Description It triggers the anonymous call rejection feature to on or off.
0-Off
Permitted
1-On, the phone will automatically reject incoming calls from users enabled anonymous call feature.
Values
The anonymous user's phone screen presents "Anonymity Disallowed".
Default 0
Web UI Account > Basic > Local Anonymous Rejection
Menu > Features > Anonymous Call > Line X > Local Anonymous Rejection
Phone UI CP925/CP935W:
More > Features > Anonymous Call > Line X > Local Anonymous Rejection
Parameter features.anonymous_response_code
It configures the code the phone responds with to the server when it receives an anonymous call.
Description
Note: It works only if "account.X.reject_anonymous_call" is set to 1 (On).
Permitted
Integer from 0 to 65535
Values
Default 433
Parameter account.X.anonymous_reject_oncode
It configures the anonymous call rejection on code.
Description
The phone will send the code to activate anonymous call rejection feature on server-side when you
activate it on the phone.
Permitted
String within 32 characters
Values
Default Blank
Web UI Account > Basic > Send Anonymous Rejection Code > On Code
Menu > Features > Anonymous Call > Line X > Send Rejection Code > On Code
Phone UI
CP925/CP935W:
More > Features > Anonymous Call > Line X > Send Anonymous Rejection Code > On Code
Parameter account.X.send_anonymous_rejection_code
It configures the IP phone to send anonymous call rejection on/off code to activate/deactivate the
Description
server-side anonymous call rejection feature for account X.
0-Off Code, the phone will send anonymous rejection off code to the server when you deactivate the
anonymous call rejection feature.
Permitted
Values
1-On Code, the phone will send anonymous rejection on code to the server when you activate the
anonymous call rejection feature.
Default 0
428
[1]
<MAC>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg