Device Management; Device Management Configuration - Yealink SIP-T3 Administrator's Manual

Device Management

You can enable the device management feature to connect device and report device information to the Yealink
Device Management Platform (YDMP)/Yealink Management Cloud Service (YMCS), where you can view device
information, manage devices, and diagnose devices.
Note
For T4XU series, make sure that you have enabled the feature of Connect DM Service (on the phone screen, go to
Security Connect DM Service
>
After you enable this feature, you also need the following parameters to connect phones to the YDMP/YMCS.
Topic

Device Management Configuration

Device Management Configuration
The following table lists the parameters you can use to configure the device management feature.
Parameter static.dm.enable
It enables or disables the device management feature.
Description
Note: For T4XU, you do not need to set this parameter. On the contrary, you need to enable this
feature on the phone (see phone UI below).
0-Disabled
Permitted Val-
ues
1-Enabled
Default
0
T42U/T43U/T46U/T48U:
Phone UI
Menu > Security > Connect DM Service
Parameter static.dm.server.address
Description It configures the server address of the YDMP/YMCS.
Permitted Val-
String within 512 characters
ues
Default Blank
Parameter static.dm.server.port
Description It configures the server port of the YDMP/YMCS.
Permitted Val-
Integer from 0 to 65535
ues
Default
443
Parameter
phone_setting.qoe.enable
Description It configures whether to report the call statistics to YDMP/YMCS.
0-Disabled
Permitted Val-
ues
1-Enabled
Default 1
Phone UI T42U/T43U/T46U/T48U:
). Otherwise, you cannot connect phones to the YDMP/YMCS.
Device Management
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Menu
>
544