Yealink SIP-T3 Administrator's Manual page 472

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Parameter multicast.receive_priority.enable
It enables or disables the phone to handle the incoming multicast paging calls when there is an active
Description
multicast paging call on the phone.
0-Disabled, the phone will ignore the incoming multicast paging calls when there is an active mul-
ticast paging call on the phone.
Permitted
Values
1-Enabled, the phone will receive the incoming multicast paging call with a higher priority and ignore
the one with a lower priority.
Default 1
Web UI Directory > Multicast IP > Paging Priority Active
Parameter multicast.receive_priority.priority
It configures the priority of the voice call (a normal phone call rather than a multicast paging call) in
progress.
Description
1 is the highest priority, 31 is the lowest priority.
0-Disabled, all incoming multicast paging calls will be automatically ignored when a voice call is in
progress.
1-1
2-2
Permitted
3-3
Values
...
31-31
If it is set to other values, the phone will receive the incoming multicast paging call with a higher or
equal priority and ignore the one with a lower priority when a voice call is in progress.
Default 31
Web UI Directory > Multicast IP > Paging Barge
Parameter multicast.receive.ignore_dnd.priority
It configures the lowest priority of the multicast paging call that can be received when DND is activ-
ated in phone mode.
Description
1 is the highest priority, 31 is the lowest priority.
0-Disabled, all incoming multicast paging calls will be automatically ignored when DND is activated in
phone mode.
1-1
2-2
Permitted
3-3
Values
...
31-31
If it is not set to 0 (Disabled), the phone will receive the incoming multicast paging call with a higher or
same priority than this value and ignore that with a lower priority than this value when DND is activ-
ated in phone mode.
Default 0
466
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg