Yealink SIP-T3 Administrator's Manual page 459

meter "account.X.timeout_fwd.target") after a period of ring time.
Default
0
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI Features > Forward&DND > Forward > AccountX > No Answer Forward > On/Off
Phone UI Menu > Features > Call Forward > AccountX > No Answer Forward > No Answer Forward
Parameter account.X.timeout_fwd.target
It configures the destination number of the no answer forward.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI Features > Forward&DND > Forward > AccountX > No Answer Forward > Target
Phone UI Menu > Features > Call Forward > AccountX > No Answer Forward > Forward to
Parameter account.X.timeout_fwd.timeout
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by "phone_set-
ting.ring_duration") seconds.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
Permitted
Integer from 0 to 20 (determined by "features.forward.no_answer.show_ring_times")
Values
Default 2
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI
Features > Forward&DND > Forward > AccountX > No Answer Forward > After Ring Time(0~120s)
Phone UI Menu > Features > Call Forward > AccountX > No Answer Forward > After Ring Time
Parameter account.X.timeout_fwd.on_code
It configures the no answer forward on code to activate the server-side no answer forward feature.
The phone will send the no answer forward on code and the pre-configured destination number (con-
figured by the parameter "account.X.timeout_fwd.target") to the server when you activate no answer
Description
forward feature on the phone.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default Blank
Supported All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg
Call Features
453