Yealink SIP-T3 Administrator's Manual page 314

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Macro Action
$I<menu item ID>$
$P<label>&T<title>&C<characters
number allowed>&N&M$
$P<EDK user input prompt
X>N<characters number
allowed>$
$L<label>$
308
Home (You can return to the idle screen by executing this command on the
l
dialing screen for T57W/T48U/T48S/T48G phones)
Example: $KDialPadPound$ means pressing the pound key.
Note: If a key (for example, Redial key) is not found but the function is avail-
able, the phone will perform the corresponding action. If a key is not found
and the function is unavailable, the execution of the action string will be
ignored.
The action is to position and enter the desired menu item.
Each menu item has a unique identifier on the IP phone, and you can con-
figure this parameter according to the system-defined menu item ID. If the
menu item ID is not defined on the phone or there is no matched menu item
on the current screen, the execution of the action string will be ignored. The
menu item ID is case-insensitive.
Example: $Istatus_list& means entering the Status menu.
Note: To view the menu item ID, you can set "edk.id_mode.enable" to 1
(Enabled) and then long press the Volume Up key when the phone is idle.
The string of the user input prompt.
"label" means the specified label for the user input prompt.
"title" means the specified title for the user input prompt.
"characters number allowed" defines the maximum number of input char-
acters.
If &N is included, the character type is Number (default input method: 123). If
&N is not included, the character type is Text (default input method: abc), you
can manually change the input method. (For T57W/T48U/T48S/T48G, if &N is
included, the input mode is numeric&symbolic. If &N is not included, the
onscreen keyboard is displayed, you can manually change the input mode.)
If &M is included, the inputs are masked by the asterisk characters "*" (dot for
T57W/T48U/T48S/T48G).
Example: $PPassword&C3&N&M$ means prompting a Password pop-up
box, the maximum number of input characters is 3, the input type is Number,
and the input is masked by the asterisk characters "*" (dot for
T57W/T48U/T48S/T48G).
Note: &T<title> is not applicable to
T57W/T48U/T48S/T48G/T46G/T42G/T41P/T29G phones.
The user input prompt string.
"EDK user input prompt X" means which EDK user input prompt is invoked. It
indicates the X defined by "edk.edkprompt.X.enable".
"characters number allowed" defines the maximum number of input char-
acters. You need to press the Enter soft key to complete data entry.
Example: $P2N5$ means invoking the EDK user input prompt 2 and inputting
5 characters at most.
Note: For more information on EDK user input prompt, refer to
Prompt Configuration.
This is the label for the entire operation. The value can be any string including
the null string (in this case, no label displays).
Description
EDK User Input