Yealink SIP-T3 Administrator's Manual page 608

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Settings > Configuration > Local Log > Max Log File Size (256-2048KB)
Parameter static.auto_provision.local_log.backup.enable
It enables or disables the phone to upload the local log files to the provisioning server or a specific
server.
Description
Note: The upload path is configured by the parameter "static.auto_provision.local_log.backup.path".
0-Disabled
1-Enabled, the phone will upload the local log files to the provisioning server or the specific server to
back up these files when one of the following happens:
Permitted
- Auto provisioning is triggered;
Values
- The size of the local log files reaches the maximum configured by the parameter "static.local_
log.max_file_size";
- It's time to upload local log files according to the upload period configured by the parameter "stat-
ic.auto_provision.local_log.backup.upload_period".
Default 0
Parameter static.auto_provision.local_log.backup.upload_period
It configures the period (in seconds) of the local log files uploads to the provisioning server or a spe-
cific server.
Description
Note: It works only if "static.auto_provision.local_log.backup.enable" is set to 1 (Enabled).
Permitted
Integer from 30 to 86400
Values
Default 30
Parameter static.auto_provision.local_log.backup.path
It configures the upload path of the local log files.
If you leave it blank, the phone will upload the local log files to the provisioning server.
If you configure a relative URL (for example, /upload), the phone will upload the local log files by
extracting the root directory from the access URL of the provisioning server.
If you configure an absolute URL with the protocol (for example, tftp), the phone will upload the local
Description
log files using the desired protocol. If no protocol, the phone will use the same protocol with auto pro-
visioning for uploading files.
Example:
static.auto_provision.local_log.backup.path = tftp://10.3.6.133/upload/
Note: It works only if "static.auto_provision.local_log.backup.enable" is set to 1 (Enabled).
Permitted
URL within 1024 characters
Values
Default
Blank
Parameter static.auto_provision.local_log.backup.append
It configures whether the uploaded local log files overwrite the existing files or are appended to the
Description
existing files.
0-Overwrite
Permitted
Values
1-Append (not applicable to TFTP Server)
602
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg