Yealink SIP-T3 Administrator's Manual page 268

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Supported
T46S, T48S, T46U, T48U, T53C, T54W, T57W, T33P, T33G
Devices
Get the picture from call-info and display it on the phone as the wallpaper while receiving/dialing
a call, or during a call:
Configure the call-info:
Case Scen-
ario
Call-Info: <http://192.168.0.1/wallpaper.jpg>;purpose=wallpaper
Set the following:
account.1.picture_info_enable = 1
Parameter phone_setting.called_party_info_display.enable
It enables or disables the phone to display the local identity when it receives an incoming call or dur-
ing a call.
Description
Note: The information display method is configured by the parameter "phone_setting.call_info_dis-
play_method". To display the local identity during a call is not applicable to
T48G/T46G/T42G/T41P/T31P/T31G/T31/T30P/T30/T29G/T23P/T23G/T21(P) E2/T19(P) E2 phones.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Web UI Settings > Call Display > Display Called Party Information
Parameter phone_setting.call_info_display_method
It configures the remote information display method when the phone receives an incoming call, dials
Description
an outgoing call or is during a call.
0-Name+Number
1-Number+Name
2-Name
Permitted
3-Number
Values
4-Full Contact Info (display name<sip:xxx@domain.com>)
5-Null
Note: Name refers to the Label; Number refers to the User Name.
Default 0
Web UI Settings > Call Display > Call Information Display Method
Parameter phone_setting.called_party_info_display_method
It configures the local party information display method when the phone receives an incoming call or
is during a call.
Description
Note: It works only if "phone_setting.called_party_info_display.enable" is set to 1 (Enabled).
0-Name+Number
1-Number+Name
Permitted
Values
2-Name
3-Number
262
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg