Yealink SIP-T3 Administrator's Manual page 269

4-Full Contact Info (display name<sip:xxx@domain.com>)
Note: Name refers to the Label, Display Name (Label > Display Name > User Name); Number refers
to the User Name.
Default
0
Parameter features.caller_name_type_on_call
Description It configures the local identity displayed when the phone receives an incoming call or is during a call.
0-Label, configured by the parameter "account.X.label".
Permitted
1-Display Name, configured by the parameter "account.X.display_name".
Values
2-User Name, configured by the parameter "account.X.user_name".
Default 0
Parameter phone_setting.call_display_name.mode
It specifies which display names to be used as the caller ID/callee ID for calls from/to contacts in the
phone directory.
Description
Note: This parameter also affects the history records display.
0-Names matched to the entries in the following phone directories are displayed preferentially, the
priority is as follows: Local Directory > Remote Phone Book > Broadsoft Network Directory >
Permitted
BroadCloud Buddies > LDAP Directory > Network signaling.
Values
1-Names provided through network signaling are displayed preferentially.
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter phone_setting.call_number_display.replace.pattern
It configures the regular expression to match the number displayed on the LCD screen when there is
Description
an incoming call, outgoing call, being forwarded if the other party's phone number is 10 digits.
Blank -The number displayed on the LCD screen will not be matched.
Permitted
String within 512 characters
Values
ular expressions.
Default 0
Related
phone_setting.call_number_display.replace.with
Parameters
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Device
Parameter phone_setting.call_number_display.replace.with
It replaces the numbers which match the string configured by the "phone_setting.call_number_dis-
play.replace.pattern".
Description
Note: It works when the "phone_setting.call_number_display.replace.pattern" is not blank.
Blank-The number displayed on the LCD screen will not be replaced.
Permitted
String within 512 characters-The number displayed on the LCD screen will be replaced by the
Values
according to regular expressions.
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Device
Case Scen- 1. Configure the following parameters:
-The number displayed on the LCD screen will be matched according to reg-
Phone Customization
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
263