Zoom Barge In Parameters - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter account.X.personal_meeting_id
It configures the personal meeting ID for the every Zoom user when they have a meeting.
Description
Note: It works only if "zm.enable" and "zm.escalate_meeting.enable" are set to 1 (Enabled).
Blank-The personal meeting ID of Zoom user is blank.
Permitted
Values
string-The personal meeting ID of Zoom user is what you configured.
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter zm.display_call_type
It configures the call type icon displayed on the LCD screen when in a call.
Description
Note: It works only if "zm.enable" is set to 1 (Enabled).
0-The LCD screen does not display the call type icon.
Permitted
1-The LCD screen displays the call type icon, DM means the call type is P2P, Onnet means the call is
Values
on the Zoom server, Offnet means the call is not on the Zoom server.
Default
1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter account.X.transfer_voice_mail.mode
It enables or disables the phone to transfer to voice mail when the phone has an incoming call or is in
a call.
Description
Note: It works only if "zm.enable" is set to 1 (Enabled).
0-Disabled.
Permitted
1-The call interface has a "Trans to VM" softkey.
Values
2-When you press the transfer softkey, you can select transfer to VM ("features.transfer.mode" is set to
0).
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Zoom Barge in Parameters

If you want to use Barge In feature, you should configure a feature access code on the phone. If no feature access
code is configured, the Barge In feature is disabled.
Parameter blf.normal_barge_in_code
It configures the feature access code for normally barging in the active call of the monitored line.
Description
If configured, you can press the Barge In soft key to barge in the call. Barge-in plays an audio alert to
583
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg